Home    >    Products    >    Signal Conditioners    >    Digital to Analog Converter


    Digital to Analog Converter  
 
Hoffer PET, Digital to Analog signal Conditioner
 
PET-1 0 to 10 VDC analog output
PET-2 4 to 20 mA analog output 3 wire
PET-3 4 to 20 mA analog output 2 wire

     Supply Voltage: 9 - 30 VDC
     Supply Current: < 4.0 mA
     Input Protection: 100 VAC, reversed leads
     Output Protection: Short to 0 VDC, Common or Signal out Continuous
     Frequency Input Range F:
             Hi: max full scale 10 kHz. min full scale 1100 Hz
             Lo: max full scale 1200 Hz. min full scale 75 Hz.
     Input Sensitivity: Standard 12 mVpp
     Linearity: 0.5% max., 0.15% typical
     Output Settling Time: Full scale change to 95% of final value 100mS to 3 sec
     Output Ripple and Noise: .2 mA max p-p, 1% of full scale.02 mA typical, .01% of full scale
     Temperature Coefficient: 25° to 40°, 0.13%/°C
     Operating Temp. Range: -40° to +85°C (-40° to +185°F)
     ZERO/SPAN Adjustment Interaction: < 1%
     3 WIRE OUTPUT VERSION: 20 mA Range
     Minimum Output Current: 0.07 mA.
     Maximum Output Current, (Full Scale Min. Cal., Zero Cal Set to 4 mA): 24.1 mA
     Load Resistance: <(+V - 6v)/ 20 mA output:
             +V=12v: < 300 ohms
             +V=24v: < 900 ohms
     Terminal Connections:
             1. Input VDC;
             2. Common;
             3. Signal Out;
             4. Mag Pickup;
             5. Mag Pickup
     CE-Compliance: EN55011, EN55022-2
 
 
PET Digital to Analog Converter.PDF